excavator water pump

Excavators are most prone to high water temperature failures. Today, I shared with you the high water temperature failure caused by theexcavator water pump. How to check if the excavator water pump is working? Remove the thermostat, turn it on, run at idle speed and high speed repeatedly, press the water pipe to see if there is water passing through the water pipe, if the water pipe is hard, it means the pressure is normal, then open the water tank cover and observe whether the water flow speed is normal. What should I do if the excavator water pump leaks? Open the top cover, disassemble the fan water blocking ring, check the inside of the water pump belt, open the bottom plate of the oil pan, and confirm the specific leakage location. If the oil seal of the water pump and the pad of the water pump are damaged, they can be replaced directly.