Reasons And Detailed Explanation Of Oil Leakage Of Hydraulic Pipe Joints Of Excavator Accessories

Oil leakage often occurs at the hydraulic pipe joints of excavator accessories. The editor reminds the excavator master to pay attention to the following reasons.

In layman's terms, due to the frequent impact of the hydraulic oil pump of the excavator accessories breaker during work, it provides sufficient power for the bucket and the drill rod of the breaker to carry out production work.

Reason 1: The strong vibration and the impact of hydraulic oil in the production work will lead to the loosening of the threads of the hydraulic pipe joints of the excavator accessories and lead to oil leakage. Therefore, the tightness of the pipe joints should be checked regularly.

Reason 2: If the material of the hydraulic pipe joints of excavator accessories is not up to standard, there will be vibration lines at the 60-degree or 74-degree connection seal, resulting in oil leakage. At this time, the confinement effect is no longer available, because The seal has been damaged.

Reason 3: The sealing ring and oil seal of the excavator accessories are aging or damaged during work and oil seepage occurs under the influence of working time and environment. At this time, they must be replaced with new ones, otherwise they are at work or during emergency repair tasks. Affecting work, if you make do with it, there is a potential safety hazard, because the temperature of the hydraulic oil will be very hot during work.

Reason 4: The occurrence of oil leakage failure of excavators may be related to the daily operation and use of excavators by excavator operators. Therefore, it is necessary to avoid the occurrence of oil leakage failures of excavator accessories. It is necessary to use it according to the regulations, and to do a good job in daily maintenance of the excavator to reduce the occurrence of oil leakage failure of the excavator.